what to make with lego bricks

Custom LEGO-Compatible Bricks!

Feb 14,  · Legos are a toy staple, necessary for any kind of decent childhood. Memories of building tall towers (to knock over), cars with mismatching wheels (to knock over towers with), and of course, stepping on the sharp, pointy corners of Lego pieces from the aforementioned tower with your bare feet (as the Legos take their revenge upon you). Oct 22, - Learn to build at home with these tips from our Master Model Builders! Visit LEGOLAND® Discovery Center to build WITH our Master Model Builders: https 37 pins.

By: Author Sheila Rogers. All of these whst include recipes and instructions to help you along the way. This post may contain affiliate links which means I may receive a small amount, at no cost to youif you make a purchase through a link. All opinions are my own and I share things I think would be of interest to boys. These are pretty easy to make whwt the results are going to make your kids happy.

That is the main goal after all. Some of these use store bought cakes, or a cake mix, others have recipes to bake the cake. All of them include some instructions on how to decorate.

Some even include step-by-step tutorials! If you have a birthday party coming up, or just want to make a fun cake, take a wiht through this maake and decide which one you like the best. You what to do in shenzhen china can make these. There are several brick cakes but they are all made differently and some have neat additional decorations so I included them all.

Honestly, it looks like you ordered it, but when you take a look at the tutorial instructions you will see that it is much quicker to make than it looks. This one impressed me! As you can see the minifig are sending Happy Birthday brickx. If you ever wanted to know how to make a LEGO lgo without fondant give this a try.

I love how simple ro is overall. It does take time because you ,ake to refrigerate the cake between frosting layers but overall it is pretty impressive and very doable. What a wonderful idea! There is nothing hard hricks this two layer minfigure cake brocks at all. You can totally make this. Now that would be very fast to make. Want to skip making the layer of bricks at the bottom of the cake? Either leave them off or try these candy bricks instead. Minifigure Birthday Cake.

Not only does this LEGO brick cake look awesome, but I really love the what to make with lego bricks she used to frost it. So effortless to do. If it were me, I would put the what is the quantiferon tb gold test on a wire rack before trying this method. Make sure to let it dry all the way before moving it.

While I was searching I found this video and decided I wanted to include it. They use pound cake from the store to make a brick so this is a very fast way to go about making a brick cake. I thought it would be good for you to watch so you could see that these cakes really are do-able. How cute is this? And it is so simple what does humidity mean in a weather forecast do. She used regular bricks against the side and on top of the ti.

You could also grab the LEGO candy in the link further up in this post and do that instead if you wanted the bricks to be edible. Bricka idea! Super fun! If you are feeding a crowd, this is one to consider as there wifh three cakes in one. I found it on the Betty Crocker website.

They actually use canned frosting. That makes it easy, right?! Big Brick Cake. Just look at the inside of this cake! It is all brick colors inside. Love that! She made this and never worked with fondant before so. To whaat it a bit easier, I was thinking one could skip the yellow fondant around the outside of the cake and just do the top pieces.

That way you still get the LEGO look but it would be more straightforward and faster as well. LEGO Cupcakes. Star Wars Cupcakes. Facebook Twitter Pinterest. I love how easy this one is and what to make with lego bricks great it looks. She has a fab tip for making the frosting so smooth. Brick Tower Cake If you are feeding a crowd, this is one to consider as there are three cakes in one.

I like how you simply stack them up. Sort of like building with LEGO! Helicopter Books for Toddlers, Preschoolers and Kindergarteners. Click here to cancel reply.

Accessibility Navigation

Custom LEGO-Compatible Bricks!: I've been working with polymer clay (FIMO, specifically) since I was about I always thought it would be neat to sculpt customized bricks to use with my LEGO and Megablocks sets, but I've been kind of stumped about how. After much th. Jun 20, - Lego Animal Creations using Lego Bricks and More Set (Basic/Classic). See more ideas about lego animals, lego brick, lego pins. Aug 24,  · For more than 15 years the New York City-based artist has been creating masterpieces using Lego bricks as his medium of choice. His creations—from towering skyscrapers to portraiture—have been.

I always thought it would be neat to sculpt customized bricks to use with my LEGO and Megablocks sets, but I've been kind of stumped about how. After much thought, several false starts, and some consultation with my little brother, I've come up with a workable solution. This is a pretty cheap and fun way to make all sorts of specialized bricks for use with your building block sets. They won't ever replace the core sets, as they aren't as regular as the real thing, but they can add some awesome elements and your own specific style to your creations.

Essentially, I made metal stamps the shape of the dots and depressions of the building bricks. Polymer clay is wrapped around the dots or pressed into the depressions, and then baked. Once cool, the stamp is removed, leaving either the desired dots or depression that will mesh with the standard building bricks!

Pull out your building bricks or your child's bricks, 'cause you're a grownup now and shouldn't be playing with toys , and build some forms. These are eventually going to be cast in plaster, and have hot metal poured into the depressions.

Make one with dots up and another with depressions up. I made a variety of hole sizes to try out. I found that the 1x2 and 1x4 spaces made the best stamps, but all of them produced usable stamps. I wanted to use pourable silicone, but I couldn't find any around town and as so often happens I didn't want to wait for shipping.

The latex is also a LOT cheaper than silicone. Place a piece of wax paper over your work space--I used a board I could take to work with me. With cheap paintbrushes, begin applying a fairly thin layer of latex over each of your molds, making certain to get into all of the nooks and crannies. When done, apply heat and let it cure from white to tan, then add another coat.

You'll need several coats I went with around a dozen , so this could take some time. Over the course of about three days, I did a coat in the morning, one at lunch, one when I got home, and another before I went to bed. I left the molds in my car at work, the car was hot inside so everything cured quickly.

I'm not sure if this was a mistake or not, but after I had several coats on, I applied some latex caulk into the depressions. I hoped it would make them stronger so they wouldn't distort when I poured in the plaster. Unfortunately, it's a different type of latex and didn't bond properly with the mold material.

Also, it took a really long time like two days to cure and I think whatever solvents were mixed in softened the mold material, turning it white. Everything worked out in the end, but I think I would use something else in the future, like a fast curing silicone caulk covered with another layer of latex.

Once everything is dry to your satisfaction, carefully peel off the wax paper. Loosen the mold all the way around the edges, then slowly pull it out of the brick original. If all has gone well, you should have a perfect negative of the building bricks! Shake up your bottle of conditioning spray and apply a couple of coats, letting the mold dry completely in between.

The conditioning spray helps both to keep the latex pliable over time and to prevent sticking to whatever you're casting in it. When dry, tape the molds into the bottom of a level waterproof container.

The one I used was a bit too small and slightly distorted some of the bricks, but it wasn't too bad. Plaster of paris is mixed at a plaster to water ratio. The DAP stuff I bought is quick curing, so you only have a few minutes to work with it once you add water. Fortunately, you'll just be pouring it into the latex mold.

Let it cure overnight to make sure it's all the way done, then remove it from the container. Slowly peel back the latex just like before. My plaster casts were a little uneven in spots, as the container was a bit small and not perfectly flat on the bottom. If I were to do this over I would have built a little cardboard box of exactly the right size to do this in. Still, when tested, both the dots and depressions meshed perfectly with LEGO bricks!

Wear eye protection! This is a dangerous step, you could set yourself, your house, and your cat on fire if you're not careful! Also, it's playing with fire, so it's fun dangerous! Set yourself up in an outdoor workspace away from anything flammable. Wrap the handle of an old metal spoon in a towel and use your propane torch to melt some plumbing solder into it. Make sure it's lead free! When the metal is melted, use the torch to heat up the plaster cavity you're going to pour the metal into.

Switch back to the metal and make sure it's as hot as you can get it, then pour it in. Once or twice while I was doing this the metal boiled and bubbled up splattering hot solder all over the place. Wear goggles! When done, wait for everything to cool down, then break the mold to remove the stamps. Use a sharp implement to clean all the plaster out of the cracks. Okay, this is the really cool part! Once your stamps are all done, get your kids together and start building some custom, specialized LEGO-style bricks!

Press polymer clay into the stamps, then add more clay to flesh out the design, smoothing over the joins. Get creative! India and I built a whole bunch of these, then built an art gallery to house them in. Bake the clay at a relatively low temperature, for a relatively short period of time.

The second time I used some clay softener and some new clay, and reduced the baking temp by 15 F and the time from 30 to 25 minutes. The resultant bricks were flexible enough that they worked!

Finally, unless you had better luck with the metal casting than I did, you'll need to grab your craft knife and trim up the edges of your bricks. My stamps are slightly irregular, so there were some bits of clay that had to be trimmed in each batch. The final step is to play with your home made bricks!

This was a whole lot of fun, and a realization of a very old DIY idea of mine. The new bricks aren't perfect, they don't snap in as securely as the real deal, but they do work just fine. I would like to find a material for the stamps that works better than the solder, and can be baked in the oven with the clay.

The stamps made from solder just weren't as perfect as I would like them to be, but I wasn't sure what other material to use. Any ideas? Thanks so much for checking out my instructable! Please take a moment to comment, rate, and subscribe, also like me on Facebook! I live for feedback from my readers, so make sure to let me know what you think!

Of course, the thing I most want is to see your own creations based on my instructable! Reply 4 years ago. Wtf, Megablocks?? Who would vote Megablocks? I mean unless you are some weirdo or something. Probably the Jeffery Dahmer types. Lego is of course the one and only correct answer. Look on page 10 for Plaster Mold Casting. Take out the pattern This would prevent the solder from spattering. There are low temperature metals listed in the book as well.

Reply 9 years ago on Step 8. Nice, thanks for the recommendation! It's only ten bucks on Amazon, I may pick up a copy. I think I might find it useful! Reply 9 years ago on Introduction. If the flawed castings were due to the solder solidifying too quickly, baking the plaster mold and filling it while it's still hot may help to slow down the cooling of the solder.

Reply 9 years ago on Step 6. Hmmm, I hadn't considered that. If I ever try this again, I'll go that route to see if I can thoroughly heat the mold before dumping in the solder.

If so, you'll have to find a substitution--latex was the cheaper alternative to my original plan to use pourable silicone. Like, directly into oogoo? I tried casting it directly into LEGO, and it kind of worked, but wasn't usable with other bricks. I'm not sure if it would be ideal for this, though, with all the small crevices. By depotdevoid depotdevoid on Facebook!

More by the author:. About: depotdevoid is short for The Depot Devoid of Thought, the place where you go when you lose… More About depotdevoid ». Here are some tools and materials you will need.

2 thoughts on “What to make with lego bricks

  • Mazur
    08.03.2021 in 01:21

    Bruce irvin and senator armstrong used the potora earnings to fuse

  • Fejinn
    11.03.2021 in 20:21

    EPJose on YouTube bro me too

Add a comment

Your email will not be published. . Required fields are marked .

*
*